ToolBox -

Basic Procedure for Sending Scan Files by Email

1. Press the [Home] key on the top left of the control panel, and press the [Scanner] icon on

the [Home] screen.

Screen Shot 2013-08-08 at 3.05.07 PM

2. Make sure that no previous settings remain.

If a previous setting remains, press the [Clear Modes] key.

3. Press the [E-mail] tab.

Screen Shot 2013-08-08 at 3.17.09 PM

4. Place originals.

5. If necessary, specify the scan settings according to the original to be scanned.

Screen Shot 2013-08-08 at 3.17.09 PM

6. Specify the destination. You can specify multiple destinations.

7. To specify the e-mail sender, press [Sender Name].

8. Press [Manual Entry].

9. Enter the e-mail address.

10. Press [OK].

11. Press the [Start] key.

 


If you have any questions after reading this article or if you need any help, please don't hesitate to contact the iSchool IT Help Desk.

http://ischool.uw.edu/help
(206) 616-3086