Notes:
- This machine only supports FAT16 or FAT32 formatted USB drives.
- SD cards must be 2GB or smaller.
- Saving might fail if the USB flash memory features password protection or other security features.
- Only connect USB flash memory to the USB slot.
- Insert the USB drive directly into the media slot.
- Do not remove the media while data is being written. Doing so will result in corrupted data.
1. Press the [Home] key on the top left of the control panel, and press the [Scanner] icon on the [Home] screen.
2. Insert a removable memory device in the media slot. You can connect only one removable memory device at a time. The media slot cannot be used if both an SD card and a USB flash memory are inserted into it at the same time.
3. Make sure that no previous settings remain. If previous settings remain, press the [Reset] key.
4. Place originals.
5. Press [Store File].
6. Press [Store to Memory Device].
7. Press [OK].
8. If necessary, specify the scan settings according to the original to be scanned.
9. Press the [Start] key. When writing is complete, a confirmation message appears.
10. Press [Exit].
11. Remove the memory device from the media slot